Walnut Hollow Hot Tool Issues

July 15th 2009:

I just emailed Walnut Hollow with this query but I wanted to post it here as well.

I have a Creative Versa-Tool wood burning kit.  Sometimes the points get black from being used so much or maybe from being turned on for extended periods of time.  The points I can sand with a very fine metal sandpaper which I usually use when needed but the threads on the points also get black.  I can use a wire brush to get the black off the threads on the points but what about the inside of the tool?

I'm having issues getting the points on and even taking them off.  I have to use a pair of pliers to put the points on and take them off because it's so tight from all the black on the threads.

So while I await their response I'm going to save this post as a draft so I don't have to edit my post.

I am still waiting for their response but while I was waiting I decided to try my own little experiment.  I tried looking for a wire brush, it looks like a tooth brush but it's wire instead of the normal plastic bristles your tooth brush has.  I wasn't so lucky but I did find something that is a bit longer than the average tooth brush with longer bristles and is meant for use in the kitchen.  So I grabbed that and also a can of WD-40 meant to keep my bicycle lubed up at all times.

I sprayed some of that on 2 of my points and it soaked the In 'N Out Burger napkins on my desk so the bottom of my desk is now an oily mess.  I proceeded to scrub the shit out of the points with the brush and even though I could see some blackness going onto the bristles, the threads didn't change.

I then squirted some WD-40 into the chamber where you screw the points, not too much, I flipped it over and tapped it on the napkin so in case I put too much in there then it would drip out.  I then tried screwing a point on and unscrewing, you know, to grease the threads and it seems to have helped a little but not too much.  Maybe it just needs that to be done several times to get that shit out of the threads on the inside and on the points.

It's too late now to get a response so back to the draft this post goes until I get a response hopefully tomorrow (Thursday).

July 20th 2009:
Dear Michel,

I believe that the ‘black’ on the Points and threads is due to a reaction when the metals get hot from the tool. To remove this, you can use fine grade sandpaper. As for any difficulty you have changing the Points using pliers, try using powdered graphite (found at most hardware stores) to help with changing Points on the tool. Powdered graphite is mostly used in locks to make keys slide in and out easier – works on our hot tool threads also.

Hope this helps,

Chris

The Lonely Buddy List

When I first got AOL it was 1997 and I made lots of friends on there who I still stay in touch with. Since then I've added services such as Yahoo, MySpace, Facebook, MSN, Gmail and ICQ so you would think that my buddy list would just be packed with lots of friends to talk to. I use so many IM programs that I have to use 1 single IM program (Pidgin) that connects to all those buddy lists just so I won't have to use up all my system resources for IMing. Yet, I face a new dilemma. Nobody is ever on anymore. My buddy list is the loneliest buddy list. I had to add myself so it wouldn't be lonely but it only makes it look more pathetic and sad :(.

Proper Bike Locks

This guy named Hal Ruzal critiques how New Yorkers lock their bicycles.  He grades them on the standard school scale of A - F.  I can say that I would easily get an F.  And I thought I was doing a good job keeping my bike safe when taking it to the grocery store.  All I have is 1 lock that I lock the frame to the pole at the grocery store.  I get a F-.  I need to lock up my new bicycle seat, my front wheel and back wheel to the bike too.  I guess I am ignorant.  Although it's a bit safer (not that much safer) in California because in my entire life the only thing that has ever been taken was a bike seat at the mall in Canoga Park.  I was only gone for 5 minutes too so they got it relatively fast.  Then there was this one time that the entire bike was gone when I came out of school, someone picked my bike out of the hundreds of bikes at the school bike lot.

Check this video out:

Back/Knee Problems w/New Seat

As the title says I am having Back and Knee (not backne as in acne on my back) issues from this new seat.  I've adjusted it every way I can to get it comfortable.  No matter how I adjust it I am being pushed forward to the handlebars and it has been causing me issues with my shoulders and my upper back.

And my right knee has been giving me issues since I got this new seat.  Keep in mind this is only day 5 so maybe 10 more days (the guy said keep trying for 3 weeks, to me 5 days is 1 week since I only ride 5 days a week) and maybe, just maybe that will go away.

I'm going to keep trying though because I really don't want to sit on anything that is going to cause numbness in my giggle area.

I removed the sheepskin during my ride today because I was thinking that maybe the sheepskin is giving me issues and it was.  That is what was making me slide forward all the time.  So just sitting on the seat without the sheepskin and the seat pretty much grabs onto my shorts like a cell phone on one of those rubber mats that you stick on your dashboard.  If that makes any sense.

I'm still going to buy another gel seat and cut the nose (or horn) off then sew it back together so it fits this new seat.  I think that will help not only raising me back up to where I was to give my knee some help but also my underwear seam won't hurt my butt lol.  And I think it will feel better on my sit bones if I'm sitting on gel instead of the seat.  Actually the seat without any cover on it is pretty cushioned, it doesn't really need any cushion so that's good.

Bike Cam 2 Video

The video starts out on Manor St. and ends up at China Grade Loop. It takes me about 44 minutes to get to my final destination from the house then after I have rested for about 5 minutes I get back on the bike and head back home. My total round trip ride coming all the way out to here is 22 miles, it takes 2 hours but waiting for the stop lights/signs and my 5 minute break my total time is about 90-95 minutes and my average speed is 14.0-14.3 mph.

At the end it says To Be Continued... As soon as I get used to riding 22 miles per day and it's not enough exercise then I will be adding more miles by continuing past China Grade Loop on the bicycle trail.

httpvh://www.youtube.com/watch?v=grd4VTPQtBs

Bike Cam Part 2 Troubles

I took the camera with me this morning and turned it on just before I got to the tunnel to go past Manor St.  I went through the tunnel, over the bridge and through the woods to grandmother's house er um wait no that's not right... ok, I went through the tunnel then over the bridge ... then kept riding.

As I went over the 2nd bridge the bicycle went over the usual bumps before and after but the 2nd bridge screwed up the camcorders ability to auto focus lol.  I tried fixing it but it just would not fix so I stopped recording but I just could not fix it.  I turned it off hoping that would help and it did.  So I turned it back on and kept riding.  I went all the way to the end of that part of the bike trail and turned off the camera.

I get home and plug the camcorder into the computer and the program I use ImageMixer 3 gives me errors.  It cannot download from the camera at all.  I have a feeling it's because of those darn bumps but then I go to watch it from the camcorder onto the computer with PowerDVD and it stops after only 20 seconds which was when I first started filming so I'm a bit stumped.

This morning at 8am they closed that part of the bike trail from the first tunnel to the 2nd tunnel until tomorrow afternoon at 2:30pm so tomorrow morning I won't be doing my 22 mile trip, instead I'm going to have to settle for 16 miles so I won't be able to do it over tomorrow.

The video plays just fine in the camera so I thought that maybe I could just plug it into the TV and record it with my DVD recorder.  Well, when I plug it into the TV it shrinks the video from 16:9 to 4:3 so that doesn't do me any good.  I'll need a widescreen TV to be able to do that.  So instead I just put the mini DVD into the DVD recorder and recorded it to a VHS then recorded it back to a regular DVD.

I tried putting the DVD into my computer but it won't recognize dvd's that I've recorded on the dvd recorder so I had to put it in my laptop.  It's uploading now so as soon as it's finished I will transfer it over to my computer and work on it.  I will try to get it on YouTube today and when I do I will post it here.  Well, as a new post.